XT FIT CPAP machine

XT FIT CPAP machine


Apex XT FIT CPAP machine is one of the best products on the market in the treatment of obstructive apneas.


XT FIT CPAP machine is a continuous pressure device that is very easy to handle, compact, economical and light, intended primarily for those users who are not familiar with the operation of these devices since it has a very intuitive interface, and for those who they are used to traveling, thanks to their small size and weight.


Its small size stands out, so you can take it wherever you want with you without causing any problem. It weighs less than a kilo! It is silent, which will not interrupt you during the rest period, also guaranteeing greater quality of sleep. It contains an easy-to-use LCD screen, where you can adjust the starting pressure, ramp time, and therapy pressure.


The user will be able to control all the functions by himself easily, he will not need to read the instructions to understand it. Includes the tube to connect it to the face mask.


XT FIT CPAP machine device is regulated by an internal micro-processor. It features a menu-driven LCD display, universal power supply, and Ramp Time Adjustment. The Ramp Time Adjustment feature allows the unit to begin at low pressures,a llowing you to comfortably fall asleep. The unit will then gradually "ramp up" the pressure over a configurable period of time until the appropriate therapy pressure is reached. This unit also has a Compliance Meter that records patient usage data that can be reviewed by a physician at a later time.


In order to configure the CPAP, it will have to be adjusted in values ??of starting pressure, ramp time (which is the time it usually takes us to fall asleep), altitude compensation, therapeutic pressure, treatment meter and performance meter. Do not panic, almost all of them are prescribed by your specialist doctor, and once you program it, you will no longer have to touch it again unless there is a problem or change in the treatment.


Once the adjustments are made and the tube and mask are connected, it will be enough to put on the selected mask and turn on the device, which, like anything new, we will have to give ourselves an adaptation period.


Features - XT FIT CPAP machine


+ It has an alarm sensor that detects the excessive low pressure function or its malfunction.

+ It has a complementary accessory, a humidifier-heater, which fits into a base together with the device, and considerably reduces nasal dryness and irritation, providing adequate humidity and / or heat to the air flow.

+ Important to know, that when the device is used with the humidifier-heater, the electrical connection is made from the outlet of the humidifier itself and not from the CPAP outlet.

+ Small and light: Its compact design, with the integrated transformer, makes it a perfect device for traveling with it. It weighs just 800 grams and measures 14.5 x 13 x 10 cm.

+ Integrated transformer.

+ Easy to use: The LCD screen allows intuitive information and adjustment of the equipment. Initial pressure, ramp time, and therapy pressure can be adjusted. Depending on models, the altitude and PVA can also be adjusted.

+ Very quiet: Does not exceed 28 dBA (measured at 1 meter distance, adjusted to a level of 10 pressure).

+ It incorporates the PVA function that reduces pressure during expiration.

+ Medical control: possibility of downloading data through an SD and USB card of up to 400 sessions for greater control by our doctor. Possibility of incorporating a humidifier to regulate the temperature and humidity of the air.


Technical characteristics - XT FIT CPAP machine


Operating mode: Continuous

Pressure range: 4 - 20 cmH2O (adjustable in 0.5 cmH2O increments)

Ramp time: 0-45 min (adjustable in 5 min increments)

Initial ramp pressure: 3 - 19 cmH2O (adjustable in 0.5 cmH2O increments)

Altitude compensation: Manual (1 - 8 levels)

Leakage compensation: Up to 45 liters / min.

Pressure stability: + / -1 cm H2O

Hourly compliance counter: Yes

Sound level: <28 dBA (measured at 10 cm H2O, 1 meter away)

Voltage: AC100 - 240V, 50/60 Hz, 0.5 - 0.3 A

Temperature range for operation: 5ºC to 35ºC / 41ºF to 95ºF

Humidity range for operation: 15% - 95% RH without condensation

Storage temperature range: -15ºC to 50ºC / 5ºF to 122ºF

Storage humidity range: 10% - 95% RH without condensation

Dimensions: 145x130x100mm

Weight: 800gr


Wizard 210 nasal CPAP mask - XT FIT CPAP machine


The size to choose is established by measuring the length of the nose.

Size S: 6cm

Size M: 7cm

Size L: 8cm


Wizard 220 nasal CPAP mask - XT FIT CPAP machine


The size to choose is established by measuring from below the lower lip to the highest part of the nose (length) and the width of the mouth (width):


Size S: 11 cm long by 10 cm wide

Size M: 12.5 cm long by 10.5 cm wide

Size L: 14cm long by 11cm wide


Obstructive Sleep Apnea (OSA) is a condition that is an intermittent and reoccurring obstruction of the upper respiratory tract, causing a complete (apnea) or partial (hypopnea) blockage of respiratory airflow during sleep. The syndrome varies in degree, depending on the position of the tongue and soft palate muscle when in a relaxed state. Breaks can last for short seconds or long minutes. This is why the treatment of this condition should be normal for the person who suffers from it, since it improves their quality of life and rest.


The most common treatment for OSA is Continuous Positive Airway Pressure (CPAP). CPAP devices can deliver constant air pressure into your upper respiratory tract via a nasal mask. This constant air pressure can keep your airway open during sleep, preventing occurrences of OSA.

Documents

550,00€ (21% VAT included)
472,73€

Our physical store is located at Calle Cavanilles 7, 28007 Madrid.

Secure SSL Purchase (+info)

Returns: 15 days.

Need any assistance? Contact us +34 915701682

Financing:
Quantity:

Details

Operating mode: Continuous

Pressure range: 4 - 20 cmH2O (adjustable in 0.5 cmH2O increments)

Ramp time: 0-45 min (adjustable in 5 min increments)

Initial ramp pressure: 3 - 19 cmH2O (adjustable in 0.5 cmH2O increments)

Altitude compensation: Manual (1 - 8 levels)

Leakage compensation: Up to 45 liters / min.

Pressure stability: + / -1 cm H2O

Hourly compliance counter: Yes

Sound level: <28 dBA (measured at 10 cm H2O, 1 meter away)

Voltage: AC100 - 240V, 50/60 Hz, 0.5 - 0.3 A

Temperature range for operation: 5ºC to 35ºC / 41ºF to 95ºF

Humidity range for operation: 15% - 95% RH without condensation

Storage temperature range: -15ºC to 50ºC / 5ºF to 122ºF

Storage humidity range: 10% - 95% RH without condensation

Dimensions: 145x130x100mm

Weight: 800gr


* Data provided by the manufacturer.

 

Warranty: 2 years

21% VAT and transportation included

Free shipping for orders shipped to Peninsular Spain. Please contact us for orders shipped to the Spanish islands and to other countries.

Related Products

Product added to cart.